Frp Grating We design and manufacture both Molded FRP gratings and Pultruded FRP walkway with material of Polyester, Vinyl ester resin and Phenolic resin grating. The Isophthalic polyester resin gives it resistance to corrosion in the marine and most chemical industries whilst the Vinyl Ester resin is used mainly where there is a concentration of acids, the Phenolic resin grating is used in high fire rating, low smoke area.   Structural Features: 1. Fiberglass staggered weaving and resin fully saturated, the FRP grating to maximize corrosion resistance. 2. The overall structure of the FRP walkway grating will be load evenly, which will help to install the grating and the uniform load supporting structure 3. The glossy surface of the FRP grating and the italic mesh make the grating self-cleaning. 4. FRP grating surface concave so that the FRP grating is with anti-skid performance.   FRP Grating features: 1. Resistance to a variety of chemical corrosion, has excellent corrosion resistance. 2. Excellent flame retardancy, to ASTM E84 level flame retardant. 3. Beautiful appearance and easy maintenance, bright color, not easy to fade. 4. Insulation in a hazardous environment with electricity, with good safety. 5. Free designed, dimensional stability     FRP walkway color The color of the FRP grating plate is made from colorants and polyesters that are compatible with polyester, so the color is not superimposed, so that it keeps the color lasting. The colorful polyester FRP grating panels can improve your living environment and change the gloomy situation in a corrosive environment, adding to the current factory. Generally FRP grating color: yellow, green, gray, red, blue, black, natural. 1.The FRP grating used in the car wash room grating is generally yellow and red, with bright colors and more beautiful appearance. 2.The floor of the factory is generally made of gray FRP grating. In these places, the requirements for aesthetics are relatively low. 3. In the lawn, the leaking floor is generally a green fiberglass grating, which is more beautiful in combination with the surrounding grass.     The structure of the FRP walkay: The FRP grating is interwoven by glass fiber and molded by resin casting. 1. The glass fiber interlaced textile and the resin fully saturate, so that the FRP grating is resistant to corrosion to the utmost extent. 2. The overall structure of the FRP grating cover distributes the load evenly, which contributes to the uniform force of the fiberglass grating installation and its supporting structure. 3. The glossy surface of the FRP grating and the italic FRP grating surface make the FRP grating self-cleaning. 4. The concave surface of the surface makes the FRP grating have anti-slip performance, and the anti-slip effect of the sanding surface is better.     Surface condition of FRP grating 1, Groove standard type FRP grating. It is an economical general-purpose non-slip standard FRP grating. The upper surface is an inner curved surface that can be non-slip. The two edges of the surface are formed during the molding process. The scope of use is very wide, such as water treatment plants and living quarters. , electroplating plants, sewage treatment plants, chemical plants and other fields.  2, Sand cover type FRP grating. Quartz sand is added to the upper surface of the FRP grating for use in oil stains, slope environments or where there is a high level of non-slip protection; especially in wet, oily, frozen environments with good slip resistance. Sanding FRP grating application areas: bridge deck, stair treads, trench cover, floor and so on. 3, Flat type FRP grating. It is a FRP grating plate with smooth surfaces above and below. It is mainly used in construction, machine walkways, FRP fences, Fiberglass fences and other fields. 4, Microporous Double-layer micro-hole FRP grating, because of the reduced opening ratio, can reduce the chance of high-altitude dangerous goods falling through the grid hole. It is ideal for use in high-altitude walkways and other areas to prevent heavy objects from falling; The micro-hole FRP grating is also very suitable for places where the wheels are walking, which can effectively reduce vibration. This type of FRP grating has three surfaces to choose from - grooved, sanded and flat.     Anti-slip performance of FRP grating The FRP grating has anti-slip function. The molded FRP grating has two kinds of non-slip concave lunar surface and non-slip sand surface which are naturally formed. The anti-slip sand surface has a mold inside the sand and is integrally molded and demolded again through the adhesive. Processing sanding two kinds, these two sanding surfaces provide superior anti-slip function, the sand layer is not easy to peel off and durable. According to relevant foreign data, accidents caused by slipping accounted for the second place in the accident. Slipping in many different factories has become the main...